GloworksGloworks
Live streaming

How Live Chess Broadcasts Work: From Wooden Board to Screen

10 November 2026 · Asif Asharaf

A practical guide for event organisers, schools, chess clubs, and live production teams.

If you've ever watched a big chess tournament online, you've seen the trick: a player moves a wooden piece on a real board, and a clean digital board on your screen shows the same move almost instantly. No one is typing it in. So how does it actually work?

It's less magic than it looks. It's a chain, and once you understand each link, you can plan a chess broadcast for anything from a grandmaster event to a school tournament.

How does a physical move become data?

There are two ways to do it: sensor boards and cameras.

Player → Board or camera → Move software → Broadcast graphics → Stream

Every chess broadcast follows this chain. The only real difference is how the move gets captured at the start.

1. Electronic boards (the professional standard)

The standard at elite events is the electronic board, and the best-known maker is DGT. To the player, it looks and feels like a normal wooden set. Underneath, every square can sense which piece is sitting on it, using electromagnetic sensing. The pieces carry tiny passive elements inside, so the board can tell a white knight from a black bishop without the player doing anything.

When a player lifts a piece and puts it down, the board works out the move and sends it to a computer over USB, Bluetooth, or a cable. Dedicated software turns those moves into standard chess notation (PGN) and publishes them as a live feed.

Why organisers like it: it is fast and very reliable, and nobody has to watch the board and key moves in.

The catch: boards cost real money. Equipping every table at a large open tournament adds up quickly.

2. Cameras and computer vision (the budget route)

If sensor boards aren't practical, a camera mounted above an ordinary board can do the same job. Software watches the video frame by frame, works out where the pieces are, and detects when a move has been made.

It's a good fit for school events and local clubs, because you only need a camera and a normal board.

But it is more sensitive to the environment than a sensor board:

  • Lighting: shadows and glare confuse the software.
  • Hands: a hand covering the board hides the move for a moment.
  • Camera position: it must be fixed, straight above the board, and not bumped mid-game.
  • Accuracy: it can misread a piece, so someone should keep an eye on the feed.

3. From move feed to what viewers see

Once the move exists as data, the rest is a normal live production.

  • The live move feed goes into broadcast software or a platform such as Chess.com or Lichess, which draws the digital board.
  • A graphics operator puts that board next to the player cameras, the clocks, and often an engine evaluation bar showing who is better.
  • The director cuts between the board, the players, and commentary like any other live show.

This is also where a studio like ours comes in: the chess data is only one input. Cameras, audio, graphics, and the stream itself still need a proper live production team.

Why does the digital board sometimes move before the clock?

Because the board reports the move the moment the piece is placed, while the clock is pressed afterwards. It's not a glitch. It's the sensor doing its job.

You'll also notice that many tournaments deliberately delay the public feed by some minutes. That is an anti-cheating measure, so nobody in the audience can feed moves to a player. If you're organising an event, decide the delay with the arbiter before going live.

A simple pre-event checklist

For the organiser

  • Decide whether you need sensor boards or cameras for each table
  • Agree the broadcast delay with the chief arbiter
  • Confirm which boards will be streamed (usually only the top few)
  • Check venue lighting and internet before the day

For the production team

  • Test the move software with the actual boards or camera
  • Fix the overhead camera position and lock it down
  • Add player cameras, clocks, and an evaluation bar to the layout
  • Run a full test game before the first round

The golden rule: test with a real game

Don't trust a setup that has only been tested with a few random moves. Play a full game, with real clocks and real hands moving fast, and watch the feed the whole way through. That's where lighting problems, missed moves, and lag show up.

Final takeaway

A live chess broadcast is a relay: board, move software, graphics, stream. Sensor boards make the first link effortless, and cameras make it affordable. Either way, the quality of what viewers see depends on testing the whole chain before the first move is played.

If you're planning a chess tournament or any live event that needs to be streamed properly, talk to us at Gloworks.